COB LED Strip (5M ROLL) LED Tape Light - No Spotting / Spotless - 8W/m 24V DC Single Colour IP65
FREE Lighting Design Service within 48 hours
Commercial & Industrial Projects Only - Send us your dimensions or drawings and we'll provide a FREE lighting design!
**PLEASE NOTE LED STRIP IS EXTREMELY FRAGILE AND REQUIRES PROFESSIONAL INSTALLATION. PRODUCT SHOULD BE ORDERED/INSTALLED BY A QUALIFIED ELECTRIAN EXPERIENCED WITH LED STRIP/LOW VOLTAGE SYSTEMS.**
This product doesn't fit in profile types LSTALFR AND LSTALSL. If you require this profile with the IP65 waterproof version, please order the clip in diffuser.
Our flexible strip LED lighting uses long life super bright LEDs, for intense single colour luminosity with extremely low power consumption of just 8 watts per metre. 320 LEDs per metre on a flexible PCB (printed circuit board), with 3M™ adhesive backing making installation of accent lighting in a variety of complex environments simple. Supplied in 5 metre rolls, strips can be cut at every 100mm, tailoring the length to suit your application. Suitable for indoor use; IP21 strips, or IP65 silicone cover for outdoor/waterproof requirements. We also stock a range of power supplies (waterproof and non-waterproof) of varying outputs according to your requirements.
DRIVER SELECTION GUIDE
|Total Length of Strip (m)||Total Load (Watts)||Driver Size (Watts)*|
Do you offer a ‘cut-to-size’ service?
Yes, please follow this link to our 'cut-to-size' COB strip.
Does the LED Tape come with Aluminium Profile?
We sell each item individually, so this product page is for the led tape/led strip only. Check out relate products below for our range of aluminium led profile here.
Can I cut the aluminium LED tape?
Yes, it can be cut with a pair of scissors or electrical cutters at specified points.
Do you have corner pieces/how do I go around corners?
We don’t do corner pieces for our LED Strip. For going around 90˚ corners, you would need to cut and solder a cable connection join.
Do you have joining pieces/ how do I join LED aluminium profile?
We don’t do joining pieces for any of our led strip as generally it shouldn't be installed in single runs longer than 10m due to voltage drop to obtain a continuous appearance.If you do have to join a section or 2 off-cuts, you would need to cut and solder a cable connection join or use a led strip connector. NOTE - LED strip connectors may not fit in all LED profiles please check prior to ordering.
What colours is the LED strip available in?
As standard, we stock 3 whites:
- Warm White 2700-3000K
- Natural White - 4000K
- Cool white - 6500-7000K
What lengths does LED strip come in?
We typically stock all of our LED Strip in 5m rolls and by the m/cut to size.
Is this waterproof? Can it be used outdoors or in bathrooms?
The LED strip itself is available in IP21 non-waterproof & IP65, waterproof / outdoor use. If outdoor or in wet locations, you would need to use suitable waterproof IP rated LED tape with your installation denoted IP65/waterproof. Note IP65 is splash-proof and not submergible.
How do I stop the LEDS spotting/dot effect?
Using a continuous spotless / non spotting LED Strip such as this one no spotting / no dotting spotless LED strip / LED tape light
What size LED tape / LED strip fits in our LED aluminium profiles?
All of our range of LED strip/led tape fits in any of our profile, so rest assured when buying both LED tape and LED profile from us, your products are compatible.
|Warranty||3 Year Warranty|
|Part L Compliant||No|
|Dimensions||5m x 10mm x 4mm|
|Input Voltage||24V DC|
|Operating Temperature||-20°C to 50°C|
|Colour Temperature||Warm White 2700K-3000K Natural White 4000K-4500K Cool White 6500-7000K|
|3-Hour Emergency Version||No|
|Built-in Microwave Occupancy Detector||No|
|1-10V Dimmable||With Compatible Driver|
|DALI Dimmable||With Compatible Driver|
|DMX 512 Compatible||Yes (via External DMX Decoder)|
Beat any written quotation by 10% Guaranteed. Email official quotes to email@example.com